The system immersed in the mikva water
- A small-medium device - a plastic body with a diameter of 180 mm and a length of 1100 mm mounted in one of the corners of the immersion tank
- A large device - two plastic bodies with a diameter of 180 mm and a length of 1100 mm.
- Inside the body(s) is a filter(s) of the "cartridge" type - made of fiberglass fabric.
- Filter size - about 10 micron
- Inside the "chlorinator" filter - a device for chlorbrom tablets with the possibility of regulating the dissolution of the tablets
- Next to the body - a drive shaft for the propeller (in the lower part) that spins the water through the filter
- Above the drive shaft (outside the water) - a DC motor is installed that operates at a very low SELV voltage
command board
- Includes timers and "timers" to control the times and durations of the engine's operation/ The board is assembled in the reception rooms in the dry areas.
- V supply voltage- 220
- Output voltage - (for the motor on the unit immersed in the mikva water) SELV DC V 24 (safety extra low voltage)
general description
- command board
- The system immersed in the water of mikvah
